Filters
Default
All Snow Plow Spreaders Clutch Pump Kits Liftgate Hoist Truck Bodies Lighting and Electrical Tarp Systems Van Equipment Truck Tool Boxes Towing Safety Apparel Truck Rack

Thanks for visiting our new website! We are currently undergoing improvements. Please click here to see our Parts Diagrams like our old site!

Shop
46179 items found.
All Products
- 46179 items
Pricelist :
Web
Sort By :
Default
Filters
  • Brand
Categories
Buyers
GASKET, 3/8 X 3/4 W/PSA , 27in LG
3006264
$ 2.29 $ 2.29 2.29 USD
Buyers
FRAME WELDMENT ASSY,TGS01B
3005920
$ 353.66 $ 353.66 353.66 USD
Buyers
SHIELD,SPINNER,TGS01B
3005913
$ 20.49 $ 20.49 20.490000000000002 USD
Buyers
Replacement .125 HP 1000 RPM Spinner Motor with SAE Connection for SaltDogg? Spreader TGSUV1B
3005693
$ 137.36 $ 137.36 137.36 USD
Buyers
HOPPER,POLY,SHPE1500, FOR SERVICE ONLY
3005574
$ 2,231.16 $ 2,231.16 2231.16 USD
Buyers
RECEIVER MOUNT,1-1/4,FOLD DOWN,WELDMENT
3004590
$ 29.64 $ 29.64 29.64 USD
Buyers
SCREW,PHH PAN,#8-32 X 5/8 ZN
3003241
$ 0.19 $ 0.19 0.19 USD
Buyers
MOTOR,THROTTLE CONTROL W/BRACKET
3003231
$ 226.48 $ 226.48 226.48000000000002 USD
Buyers
LID,ASSEMBLY,TGS01A/TGS01B
3003079
$ 67.86 $ 67.86 67.86 USD
Buyers
SHAFT ASSEMBLY,TGS05 SERIES AUGER
3003035
$ 123.73 $ 123.73 123.73 USD
Buyers
LID,ASSEMBLY TGS05A/TGS05B
3002511
$ 127.64 $ 127.64 127.64 USD
Buyers
MOTOR DRIVE,ASSEMBLY TGS05A/5B
3002502
$ 341.62 $ 341.62 341.62 USD
Buyers
COVER,MOTOR,CUT & DRILLED FOR
3002495C
$ 20.35 $ 20.35 20.35 USD
Buyers
CHANNEL, MOTOR MOUNTING
3002494
$ 75.38 $ 75.38 75.38 USD
Buyers
SHIELD,SPINNER,TGS05A/TGS01A
3002486
$ 26.22 $ 26.22 26.22 USD
Buyers
SILL EXTENSION RH 78/96inHOPPER
3002270SS
$ 90.12 $ 90.12 90.12 USD
Buyers
SILL EXTENSION RH ORANGE FNSH
3002270B
$ 46.25 $ 46.25 46.25 USD
Buyers
SILL EXTENSION LH 78/96inHOPPER
3002269SS
$ 90.12 $ 90.12 90.12 USD
Buyers
SILL EXTENSION,LH ORANGE FNSH
3002269B
$ 46.44 $ 46.44 46.44 USD
Buyers
CHUTE,SPINNER EXTND WLDMNT SST
3002120
$ 875.81 $ 875.81 875.8100000000001 USD
Buyers
CHUTE, WELDED SPINNER STD SST
3002114
$ 658.42 $ 658.42 658.42 USD
Buyers
CHUTE, SPINNER EXT WELDMENT
3001405
$ 520.52 $ 520.52 520.52 USD
Buyers
GUARD, ENGINE MOUNT CS
3001381
$ 27.60 $ 27.60 27.6 USD
Buyers
WASHER 3/8 X .06 THICK, NYLON
3001361
$ 0.12 $ 0.12 0.12 USD
Buyers
NUT,HEX NYLOCK #8-32 ZINC
3001352
$ 0.15 $ 0.15 0.15 USD
Buyers
CHUTE, WELDED SPINNER STD CS
3001306
$ 307.25 $ 307.25 307.25 USD
Buyers
WASHER,FENDER 5/16ID X 1.25OD
3001158
$ 0.07 $ 0.07 0.07 USD
Buyers
Replacement Wire Harness for SaltDogg? TGS Series Spreaders
3001152
$ 24.78 $ 24.78 24.78 USD
Buyers
STRAP, RUBBER LATCH
3000281
$ 2.50 $ 2.50 2.5 USD
Buyers
Hitch Plate With 2-1/2 Inch Receiver Tube for Ford? F-350 - F-550 Cab & Chassis (1999+)
1809061A
$ 577.14 $ 577.14 577.14 USD
Ready to use with little or no fabrication needed.
Several models to choose from to fit your vehicle/chassis.
Easily connect safety chains to forged D-rings.
Convenient receiver tube hitch mounting.
Corrosion-resistant powder coating.
Made in USA
The Hitch Plate with 2-1/2 Inch Receiver Tube from Buyers Products is designed to be ready to use so you don't need to spend time at the fabricators. It features an attached 2 in. or 2-1/2 in. receiver tube, two forged D-rings, and a pre-punched hole that fits most trailer electrical connectors.

The 1/2 in. thick hitch plate includes ICC bumper protection and features a black powder-coated finish for corrosion resistance. It should be both welded and bolted to the frame.

The hitch plate fits Ford chassis (not for pickups). Please consult the vehicle/chassis owner's manual before installing.
Buyers
Hitch Plate with Receiver Tube 1/2 x 17.42 Inch for Ford? F-350 - F-550 Cab & Chassis (1999+)
1809060A
$ 548.93 $ 548.93 548.9300000000001 USD
Ready to use with little or no fabrication needed.
Several models to choose from to fit your vehicle/chassis.
Easily connect safety chains to forged D-rings.
Convenient receiver tube hitch mounting.
Corrosion-resistant powder coating.
Made in USA
The Hitch Plate with 2 Inch Receiver Tube from Buyers Products is designed to be ready to use so you don't need to spend time at the fabricators. It features an attached 2 in. receiver tube, two forged D-rings, and a pre-punched hole that fits most trailer electrical connectors.

The 1/2 in. thick hitch plate includes ICC bumper protection and features a black powder-coated finish for corrosion resistance. It should be both welded and bolted to the frame.

The hitch plate fits Ford, Chevy/GMC and Dodge/RAM chassis (not for pickups). Please consult the vehicle/chassis owner's manual before installing.

Product Common Use: Towing
Buyers
Flatbed/Flatbed Dump Hitch Plate Bumper With 2 Inch Receiver
1809055
$ 489.50 $ 489.50 489.5 USD
Specially designed for flatbeds and flatbed dump trucks.
For use with cab and chassis trucks with a nominal 34 in. frame width.
Pre-fabricated for easy installation.
Corrosion-resistant powder coating.
Provides ICC bumper protection.
This flatbed hitch plate bumper from Buyers Products is designed to accommodate the longer overhang of flatbeds and flatbed dump trucks, while still providing ICC bumper protection. It will handle towing weights up to 20,000 lb.

This versatile product offers a 2 position pintle hook mount for a range of height adjustment. It also includes two forged D-rings for safety chains and a pre-punched hole that fits standard electrical connectors. Its black powder coating is corrosion-resistant.

The bumper is ready to mount on Ford F-350, F-450 and F-550 trucks cab and chassis trucks with a nominal 34 in. frame width, while drilling is required for GM trucks. It should be both welded and bolted to the frame.
Product Common Use: Towing, Flatbed Trucks, Flatbed Dump Trucks
Buyers
Fabricators Hitch Plate 1/2 x 34 x 15-1/2 Inch
1809040
$ 307.53 $ 307.53 307.53000000000003 USD
Customize your hitch plate to meet your specific vehicle and needs.
Multiple pintle hook mounting positions.
Choose the thickness you need.
The Fabricators Hitch Plate from Buyers Products lets you build your hitch plate to meet your specific vehicle and needs.

Available in thicknesses of 1/2 in., 5/8 in., 3/4 in., or 1 in., the hitch plate features multiple pintle hook mounting positions and a pre-punched hole for electrical connectors. The hitch plate is welded to the frame.

Included are two D-rings and weld-on gussets for custom placement.

Hole Diameter:
.56” for 1809027A, 1809040, 1809042, 1809043
.812” for 1809029
Vertical Hole Spacing:
1.75” for 1809027A, 1809040, 1809042, 1809043
2.25” for 1809029
Horizontal Hole Spacing:
3.38” for 1809027A, 1809040, 1809042, 1809043,
4.5” for 1809029
Product Common Use: Dump Trucks
Buyers
Hitch Plate with Pintle Mount for Ford? F-350 - F-550 Cab & Chassis (1999+) - Bottom Channel
1809031A
$ 474.75 $ 474.75 474.75 USD
Ready-to-use with little or no fabrication needed.
For use with cab and chassis trucks with a nominal 34 in. frame width.
Corrosion-resistant black powder-coated finish.
Built-in trailer connector location.
Four pintle hook mounting positions.
Built-in ICC bumper protection.
Made in the USA.
The Hitch Plate for Pintle Mounting with Bottom Channel from Buyers Products features multiple pintle hook mounting positions, two forged D-rings, and a pre-punched hole that fits most trailer electrical connectors.

The hitch plate is pre-fabricated and ready to use. The 1/2 in. thick hitch plate includes ICC bumper protection and features a black powder-coated finish for corrosion resistance. It should be both welded and bolted to the frame.

Available in several chassis-specific models (not for pickups). Please consult the vehicle/chassis owner's manual before installing. For use with cab and chassis trucks with a nominal 34 in. frame width.
Product Common Use: Upfitters
Buyers
Fabricator's Hitch Plate 1 x 34-1/2 x 22-1/2 Inch
1809029
$ 849.49 $ 849.49 849.49 USD
Customize your hitch plate to meet your specific vehicle and needs.
Multiple pintle hook mounting positions.
Choose the thickness you need.
The Fabricators Hitch Plate from Buyers Products lets you build your hitch plate to meet your specific vehicle and needs.

Available in thicknesses of 1/2 in., 5/8 in., 3/4 in., or 1 in., the hitch plate features multiple pintle hook mounting positions and a pre-punched hole for electrical connectors. The hitch plate is welded to the frame.

Included are two D-rings and weld-on gussets for custom placement.

Hole Diameter:
.56” for 1809027A, 1809040, 1809042, 1809043
.812” for 1809029
Vertical Hole Spacing:
1.75” for 1809027A, 1809040, 1809042, 1809043
2.25” for 1809029
Horizontal Hole Spacing:
3.38” for 1809027A, 1809040, 1809042, 1809043,
4.5” for 1809029
Buyers
Fabricators Hitch Plate 3/4 x 34-1/2 x 23-1/2 Inch
1809027A
$ 658.63 $ 658.63 658.63 USD
Customize your hitch plate to meet your specific vehicle and needs.
Multiple pintle hook mounting positions.
Choose the thickness you need.
The Fabricators Hitch Plate from Buyers Products lets you build your hitch plate to meet your specific vehicle and needs.

Available in thicknesses of 1/2 in., 5/8 in., 3/4 in., or 1 in., the hitch plate features multiple pintle hook mounting positions and a pre-punched hole for electrical connectors. The hitch plate is welded to the frame.

Included are two D-rings and weld-on gussets for custom placement.

Hole Diameter:
.56” for 1809027A, 1809040, 1809042, 1809043
.812” for 1809029
Vertical Hole Spacing:
1.75” for 1809027A, 1809040, 1809042, 1809043
2.25” for 1809029
Horizontal Hole Spacing:
3.38” for 1809027A, 1809040, 1809042, 1809043,
4.5” for 1809029
Product Common Use: Dump Trucks
Buyers
Vehicle ICC Bumper 62 Inch Long x 17-1/2 Inch Tall
1809025
$ 195.73 $ 195.73 195.73000000000002 USD
Buyers
2 Inch Ball Mount With 6 Inch Drop x 10 Inch Long Tube Chrome
1803016
$ 38.31 $ 38.31 38.31 USD
Attractive and durable chrome finish resists corrosion and wear.
Tough welded steel construction.
Choose the length and drop/rise that meets your needs.
The 2 Inch Chrome-Plated Ball Mount from Buyers Products combines performance and style, and is rated to 7,500 lb. Choose the rise and drop size to fit your trailer height.

The chrome-plated mount is durable and corrosion-resistant for years of use. Each mount features two-piece welded steel construction. Both fit 2 in. receiver tubes and accepts 1 in. shank diameter towing balls.
Product Common Use: Utility Trailers, Motorcycle Trailers, Car Trailers, Construction Trailers
Buyers
2 Inch Bulk Chrome Hitch Balls With 1 Inch Shank Diameter x 2-1/8 Long
1802134
$ 11.59 $ 11.59 11.59 USD
Buyers
18x18x36 Inch Black Steel Underbody Truck Box With 3-Point Latch
1732305
$ 356.80 $ 356.80 356.8 USD
The perfect balance of security and weather resistance with a durable 14 Ga steel body and black powder-coated finish.
Box contents stay safe and secure behind a recessed drop door and continuous hidden hinge.
Protect against weather and theft with the 3-point locking, die cast compression latch system.
Can be mounted on either a flat surface or under-bed (under-bed installation requires mounting brackets, sold separately).
Built for long life with aircraft-grade cables and a replaceable gasket sealing system.
Made in the USA.
Protect and easily access your equipment with the Buyers Products Black Steel Underbody Truck Box with 3-Point Latch. Available in a variety of sizes, each professional-grade truck tool box has a rugged 14 Ga steel body that can handle the harshest job sites. The truck toolboxes are powder-coated inside and out for superior corrosion resistance and style.

The continuous hidden hinge and replaceable gasket system keep weather and grime away from your tools. Aircraft-grade cables help prevent damage. The locking, 3-point compression latch provides a tight seal and deters theft.