HILLTIP ICESTRIKER COMBI PICKUP
HillTipCombiPickup
IceStriker™ 1200-1500 AM combi salt spreaders for 1/2 to 1 ton trucks
Capacity: 1.0 & 1.5 Cubic Yard
Fits: 1/2, 3/4 & 1 Ton Trucks
Hopper Material: Poly
Spreading Material: Salt, Sand, Granulate/Mixed
Please contact us for more information about this product.
Request a QuoteShare this product:
Hilltip IceStriker 1.0 -1.4 cu yds Truck Combi Spreader Specifications
SPREADER SPECIFICATIONS
| MODEL | 1200 AM | 1500 AM |
|---|---|---|
| Total length (including spinner) | 8.6 ft | 9.8 ft |
| Hopper length | 6.2 ft | 7.5 ft |
| Minimum truck bed length | 6 ft | 7 ft |
| Width, min. truck bed | 35" | 35" |
| Width, maximum (with tarp mounted) | 45" | 45" |
| Total height of the hopper from the loadingnsurface of the carrying vehicle | 39" | 39" |
| Capacity, struck | 1.0 cu yd | 1.4 cu yd |
| Capacity, rounded | 1.2 cu yd | 1.6 cu yd |
| Weight (empty) | 495 lb | 594 lb |
| Hopper construction, dual wall | Poly | Poly |
| Spreading width, min-max | 2-40 ft (may vary depending on material) | |
| Spinner size | 15" | 15" |
| Auger diameter (stainless steel) | 4.5" | 4.5" |
| Material | Salt, sand, granulate/mixed (max 5/16" ∅) | |
| Vehicle | 1/2 and 3/4 ton trucks | 3/4 and 1 ton trucks |
LIQUID SYSTEM (optional)
| MODEL | 1200 AM | 1500 AM |
|---|---|---|
| Pre-wet, Spray volume | 0.8-3.2 gal/min | 0.8-3.2 gal/min |
| Spraybar, Spray volume | 20 gal/lane mile at 10-20 mph | 20 gal/lane mile at 10-20 mph |
| Pre-wet, Spraying width | 3-26 ft (together with spreading material) | |
| Spraybar, Spraying width | 7-16 ft | 7-16 ft |
| Pre-wet, liquid tank capacity | 120 gal | 140 gal |
| Spraybar, liquid tank capacity | 120-320 gal * | 140-400 gal * |
| Spraying material | Anti- and de-icing liquids, water, liquid fertilizers ** | |
* With optional patented bladder tank inside for spray bar system
** Do not use flammable or petroleum liquids for the liquid system
Hilltip IceStriker 1.0 -1.4 cu yds Truck Combi Spreader Featues
COLOR SCREEN CONTROLLER
The controller lets you customize your spreading session according to your current situation. Automatic GPS-speed control adjusts the amount of spreading material (lbs/1000 sq ft) according to your vehicle speed, while manual mode lets you insert a fixed auger speed. The controller additionally collects and saves essential data to an USB memory, allowing you to generate spreading reports. The controller also makes it easy to turn on functions like vibrator, beacon and work light, from inside the cabin.
FLIP UP CHUTE
Stainless steel flip-up chute, designed for spreading salt with high humidity
FEED MECHANISM - AUGER
Feed mechanism: Auger. Image shows the 4.5″ stainless steel auger.
VIBRATOR
Vibrator prevents bridging and de-icing material from clogging by shaking the inverted Vee.
INVERTED - V
Inverted-V helps reduce heavy start-up loads on the auger. All in stainless steel.
ALSO INCLUDES:
12 or 24 volt dual motors, mounted inside a sealed weather-resistant enclosure.
Built-in tie-down loops for strapping unit to truck
Top screen prevents rocks and big material chunks from getting into the hopper
Additional tank for rinsing / cleaning the spray system with anti-freeze liquid after each use
Built-in tie-down loops for strapping unit to truck
Includes an accessory wire for optional work light and beacon light that can be activated from the standard controller
Tarp kit
| Capacity | 1.0 cu yd or 1.5 cu yd |