HILLTIP 500 SS ICESTRIKER SPREADER
H24816
Our sand and salt spreader is built to meet the requirements of the UTV and 1/2 ton pickup truck segment. The high quality stainless steel hopper body guarantees a long-lasting corrosion-free use. The salt spreader can be equipped with an optional pre-wet kit.
Capacity: 0.5 Cubic Yard
Fits: UTV and 1/2 ton Pickup Trucks
Hopper Material: Stainless Steel
Spreading Material: Bulk sand, bulk gravel, bulk/bag salt, sand-salt mixes and fertilizers
Please contact us for more information about this product.
Request a QuoteShare this product:
Hilltip IceStriker 0.45 cu yd Stainless Steel Spreader Specifications
| MODEL | 500 |
|---|---|
| Total width | 35" |
| Total length | 65" |
| Hopper length | 45" |
| Height | 30" |
| Weight (empty) | 265 lb |
| Capacity (water level) | 0.45 cu yd |
| Capacity (rounded) | 0.50 cu yd |
| Hopper construction | Stainless Steel |
| Spreading width | 3-30 ft (may vary depending on material) |
| Spinner diameter | 15" |
| Auger diameter | 2.5" |
| Material | Salt, sand, gravel, mixes (max 5/16" ∅) |
| Power source | Electric 12V DC |
PRE-WET SYSTEM (optional)
| MODEL | 500 |
|---|---|
| Spray volume | 0.8-3.2 gal/min |
| Liquid tank capacity | 26 gal |
| De-Icing solutions | Anti- and de-icing liquids, water, liquid fertilizers * |
* Do not use flammable or petroleum liquids for the liquid system
Hilltip IceStriker 0.45 cu yd Stainless Steel Spreader Features
COLOR SCREEN CONTROLLER
The controller lets you customize your spreading session according to your current situation. Automatic GPS-speed control adjusts the amount of spreading material (lbs/sq ft ) according to your vehicle speed, while manual mode lets you insert a fixed auger speed. The controller additionally collects and saves essential data to an USB memory, allowing you to generate spreading reports. The controller also makes it easy to turn on functions, like vibrator, beacon and work light, from inside the cabin.
FLIP UP CHUTE
Adapt these three columns to fit your design need. To duplicate, delete or move columns, select the column and use the top icons to perform your action.
INVERTED V
To add a fourth column, reduce the size of these three columns using the right icon of each block. Then, duplicate one of the columns to create a new one as a copy.
VIBRATOR
Delete the above image or replace it with a picture that illustrates your message. Click on the picture to change its rounded corner style.
AUGER
Adapt these three columns to fit your design need. To duplicate, delete or move columns, select the column and use the top icons to perform your action.
TOP SCREEN
To add a fourth column, reduce the size of these three columns using the right icon of each block. Then, duplicate one of the columns to create a new one as a copy.
ONLINE DATA-LOGGING
Delete the above image or replace it with a picture that illustrates your message. Click on the picture to change its rounded corner style.
ALSO INCLUDES:
Built-in tie-down loops for strapping unit to truck
Hopper body includes molded alternate license plate area
The motor is mounted inside a sealed weather-resistant enclosure, and requires no pulleys, sprockets, belts or chains
Includes an accessory wire for optional work light, beacon light and rear camera that can be activated from the standard controller
- Structural steel construction with zinc prime & powder coated finish
- interior body widths are 88″(EXT) & 87″(INT) and exterior width is 96″
- Interior height is 72″ high
- Floors are constructed of 10GA steel sheet with 3″ structural channel on 16″ centers
- Posts are constructed of 12GA steel sheet; exterior posts are 5″ formed posts on 36″-48″ centers, Interior posts are 3″ structural channel on 16″ centers
- Top rails are constructed of 3″ x 3″ x 1/8″ square steel tubing
- Rear corner posts are constructed of 7GA steel
- Roofs are constructed of 12GA steel with a 6″ peak
- Lockable security-style doors with 3″ x 3″ supports
- Standard 6″ steel ground rollers