CM Tuck Beds CBA Component Body

CMCBA
CMCBA CM Truck Beds CM Truck Beds

CM’s aluminum component style service body is perfect for the trades that look to CM for an innovative, lightweight service body. With our modular design, we are able to offer a more customizable design than any manufacturer on the market today, manufactured with a lighter weight material to maximize storage capacity.

Please contact us for more information about this product.

Request a Quote


Share this product:

CM Tuck Beds CBA Component Body Specifications

Lengths76", 81", 82", 98", 110", 134"
Headache RackOptional
Deck3/16" Aluminum Deck with Black Lava Coating
Frame Rails3/16" Aluminum
Crossmembers3/16" Aluminum
GN HitchN/A
BP HitchOptional Bolt-on (Cab Chassis)
Fuel FillAngled Cast
12V Trailer PlugN/A
Rear LightingClear LED Oval
Light Box (Rear Skirt)N/A
Marker LightingBullet DOT approved LED
Toolbox6 Standard Integrated Toolboxes
Toolbox HandleChrome T Handle Compression
FendersPolished Aluminum Fender Trim
 SidestepsN/A
Tiedowns(4) Tiedown Loops

CM Tuck Beds CBA Component Body Features

 Super-durable powder-coat finish

Using the highest quality powder-coat finish, we go under every edge and cover every crevice to ensure your truck bed is protected. This superior finish also adds a shine that will last for many years.

 Non-slip black lava

Count on the toughest, most durable deck coating that extends the life of our truck bodies. Not only does it hold up through the rigorous work, but it also provides a non-skid surface.

 Gas Cylinder-style door holders

These gas shocks provide strength that allows our doors to open smoothly and stay open so you can use your truck body for what its intended for…work!

  LED rear lighting with wiring harness

Our clear LED lights are brighter, easy-to-maintain, and use less power than conventional incandescent lights, so your lights will be easily seen and recognized.

  Recessed rear bumper

Our crash zone bumper reduces potential damage to your vehicle while adding safety and peace of mind when you’re on the road.

  Treadbrite aluminum compartment tops

No covers here! Solid aluminum compartment tops provide strength to the tops of our toolboxes and all that they can hold.

  T-handle twist compression latches

The T-handle compression latches on our panel doors allow for easy access to the body’s storage compartments, while keeping moisture out of the toolbox and away from your tools when shut.

  Vise socket in bumper

We put a vise well in the rear of every bumper on every service body that we manufacture, so when you are ready to work, our bodies are too.

  Heavy-duty rear tailgate

When you haul materials on our decks, you can rest assured that our tailgates will be tough enough to keep the material inside of the deck. They are rated at over 400 lbs., supporting even the largest operators to gain access into our bodies.

  Bolted body for secure attachment

Our component bodies are bolted together, making repairs on our bodies easy. Need a different configuration? Just unbolt one side and attach a different one.

  Universal body and bumper mounting kit

Installation has never been easier, thanks to our easy-to-use mounting kits — included standard with every installation has never been easier, thanks to our easy-of-use mounting kits – included standard with every SB and CB.

 Automotive D-bulb weather stripping

Weather-stripping is an important feature of any body. Our doors are sealed with D-bulb weather-stripping to ensure that no moisture gains entry to the interior of our toolboxes.

 Multi-panel doors with internal reinforcements

Our doors are built with reinforced panels to prevent flexing and sagging with repeated use.

 Polished aluminum fender

Stainless fenders add a stylish touch to your service body, with the added benefit of being corrosion-resistant too.

Paint:

 100% primer & top coat

We use the industry’s finest powder primer and powder top coat so you don’t have to worry about rust and corrosion, keeping our beds looking good for years to come.

 Individually coated components for maximum coverage

Because CM coats every single part of our service body, you can rest assured that the parts of the body that you cannot see look as good as the ones you can.

 Powder-coated tool box interior

We powder and primer everything, even the interior of your toolboxes. This ensures that when your tools shift in transit, they won’t end up with rust and corrosion.

Warranty:

 4-Year / 48,000-mile warranty

Some companies say they stand behind their products, we put it in writing. We offer the longest warranty for the body, offering a 48-month warranty. We recognize what an investment a service body can be, and we want you to know that were with you today, and four years from now.

 10-Year no rust-through guarantee (Aluminum)

 

        
  • Structural steel construction with zinc prime & powder coated finish
  • interior body widths are 88″(EXT) & 87″(INT) and exterior width is 96″
  • Interior height is 72″ high
  • Floors are constructed of 10GA steel sheet with 3″ structural channel on 16″ centers
  • Posts are constructed of 12GA steel sheet; exterior posts are 5″ formed posts on 36″-48″ centers, Interior posts are 3″ structural channel on 16″ centers
  • Top rails are constructed of 3″ x 3″ x 1/8″ square steel tubing
  • Rear corner posts are constructed of 7GA steel
  • Roofs are constructed of 12GA steel with a 6″ peak
  • Lockable security-style doors with 3″ x 3″ supports
  • Standard 6″ steel ground rollers
Recently viewed Products