Filters
Default
All Snow Plow Spreaders Clutch Pump Kits Liftgate Hoist Truck Bodies Lighting and Electrical Tarp Systems Van Equipment Truck Tool Boxes Towing

Thanks for visiting our new website! We are currently undergoing improvements. Please click here to see our Parts Diagrams like our old site!

Shop
11 items found.
  1. Shop
  2. Spreaders
  3. Truck Spreaders - 11 items
Pricelist :
Web
Sort By :
Default
Filters
(Clear All)
  • Brand : Meyer
Filters
  • Brand
Categories
  • Capacity
  • Material
  • Length
  • Engine Type
  • Vibrator
  • Spreader Discharge
  • Controller
  • Spreader System
RESET
Meyer
MEYER RTG PREMIUM DUMP TRUCK SPREADER
MEYRTG
USD
Turn Your Dump Truck Into A Salt Spreader - The Meyer Replaceable Tailgate spreader is a center discharge stainless steel, 12-volt electric powered spreader that reliably moves salt, sand or combination of both. It fits beds that are 84- to 90-inches in width and uses a self-contained auger to move the material. The Meyer RTG spreader easily replaces your existing tailgate and provides adequate ground clearance for the spinner mechanism. It uses a combination of a self-contained auger with removable spinners and can easily be added to any dump truck. It’s the perfect spreader for parking lots because its center drop allows for complete lane coverage.

Fits: Medium-duty Dump Trucks (15,000 GVW and larger)
Motor: Electric
Construction Material: Stainless steel
Spreading Material: Salt, 50/50 salt-sand mix, sand
Meyer
MEYER UNDER TAILGATE PREMIUM DUMP TRUCK SPREADER
MEYUTG
USD
Turn Your Dump Truck Into A Salt Spreader - The Meyer Under Tailgate (UTG) Premium Spreader has all the same great features and benefits of the Baseline 960, but it’s constructed with heavier gauge stainless steel, meaning it was built to take more of a beating. This unit doesn’t require you to replace your tailgate, so you can use the dump bed when the spreader is not in use. Meyer UTG Premium spreaders can apply salt, sand or combination of both, from four to 40 feet away on icy drives and snowy parking lots.

If your vehicle has a central hydraulics system and you want to use it to power your spreader, you need our hydraulic-driven UTG. It can be powered using a direct-drive or gearbox-drive system. Direct-drive gives you higher performance and decreased maintenance, while the gearbox-drive offers better control at low spread rates for more efficient spreading. For dump trucks without central hydraulics, or if you don’t want to use them to drive the spreader, you’ll want a Meyer electric UTG. Electric motors offer many ease-of-use advantages and are ideal for lighter, free-flowing materials.

Fits: Medium-duty Dump Trucks (15,000 GVW and larger)
Motor: Hydraulic or electric
Construction Material: Stainless steel
Spreading Material: Salt, 50/50 salt-sand mix, sand
Meyer
MEYER POLYHAWK HOPPER SPREADER
MEYPOLYHAWK
USD
Have It Your Way With A Polyhawk - Popular with contractors and other vocational users, the Polyhawk is powered by your choice of a Honda or Briggs & Stratton gas engines or a dual, 12-volt electric motor. The Polyhawk can even be operated by your vehicle’s central hydraulic system. Available in in 6' and 8' lengths, Polyhawks are perfect for spreading bulk materials like rock salt with sand mixed in it.

Capacity: 1.5 or 2.0 Cubic Yards
Motor: Briggs and Stratton, Honda, 12-volt dual electric, Central Hydraulic
Fits: 3/4-to-1 Ton Pickup Trucks
Hopper Material: Polyethylene
Spreading Material: Salt, 50/50 Salt/Sand Mix, Sand
Meyer
MEYER CROSSFIRE HOPPER SPREADER
MEYCROSSFIRE
USD
Better By Design And Backed By A 5-Year Warranty - The Crossfire was designed with extensive input from experienced end users looking for a better insert spreader. Each model has been designed to be easier to use, easier to maintain and easier on your vehicle. The Crossfire Deluxe was designed with an integrated pre-wet system.

Capacity: 1.5 or 2.0 Cubic Yards
Fits: 3/4-Ton Pickup Trucks
Hopper Material: Polyethylene
Spreading Material: Dry, Free-Flowing Rock Salt
Meyer
MEYER ELITE CAB & CHASSIS HOPPER SPREADER
MEYELITECAB
USD
Meyer offers eight different configurations in our Elite Cab & Chassis insert spreader line-up. All are built using fewer moving parts to keep you on the job spreading. Hoppers are made of stainless steel and are available in 8' and 10' lengths with 3.5 and 4.5 cubic yard capacities. Drive options include 10hp Brigg & Stratton gas, 11hp Honda gas, 12-volt dual electric or central hydraulics, so there's a model perfect for your municipality's fleet of trucks.

Capacity: 3.5 or 4.5 Cubic Yards
Engine: Briggs and Stratton, Honda, 12-Volt Dual Electric, Central Hydraulics
Length: 8' or 10'
Fits: Cab & Chassis
Hopper Material: Stainless Steel
Spreading Material: Salt, 50/50 Salt-Sand, Sand
Meyer
MEYER BASE LINE 600 & 800 HOPPER SPREADER
MEYBASELINE68
USD
Introducing A Reliable And Economical Spreader Line - Powered by a Briggs & Stratton or Honda gas engine or dual-electric 12-volt motor, the BL-600 and BL-800 insert spreaders feature a stainless steel inverted-V and drag chain conveyor system for even distribution of snow and ice removal material. The extra-large capacity hopper fits into short or long bed pickup trucks and is built to withstand anything Mother Nature can throw at it.

Capacity: 1.5 or 2.0 Cubic Yards
Motor: BL-600 - 6.5 HP Briggs and Stratton. BL-800 - 11hp Honda, 10.5hp Briggs & Stratton or 12-volt Dual Electric
Lengths: 5' (LPV), 6' (PV), 8' (PV)
Fits: Pickup Truck
Hopper Material: Stainless steel or Carbon steel (8' Briggs model only)
Spreading Material: Salt, 50/50 Salt/Sand Mix, Sand or Free-Flowing Granular Material
Meyer
MEYER ELITE PICKUP TRUCK HOPPER SPREADER
MEYELITE68
USD
Meyer's Elite pickup insert spreader is available in 0.5, 1.5 and 2.0 cubic yards to fit in the bed of today's most popular pickup trucks. It's powered by your choice of 10.5hp Briggs & Stratton or 11hp Honda gas, 12-volt dual electric or central hydraulics. With ten models available, there's one perfect for your spreading jobs. Designed for contractor use, the Elite pickup insert spreader allows you to spend less time adjusting or cleaning and more time on the job. It provides the best performance possible, every time you use it.

Capacity: LPV - 0.5, PV - 1.5 and 2.0 cubic yards
Engines: 10.5hp Briggs & Stratton, 11hp Honda, 12V Dual Electric, Central Hydraulics
Lengths: 5' (LPV), 6' (PV), 8' (PV)
Fits: Pickup Truck
Hopper Material: Stainless Steel
Spreading Material: Salt, 50/50 Salt-Sand, Sand
Meyer
MEYER BLASTER SPREADER
MEYBLASTER
USD
When you need to control the flow of any material, the Meyer Blaster is the tailgate spreader for you. Compatible with ½-ton and larger pickup trucks with a two-inch receiver or tractors with a three-point hitch, the Meyer Blaster comes in two sizes: The Blaster-350 is available in a 350 lb/6.5-cubic-foot capacity and the Blaster-750 features a 750 lb/12.8-cubic-foot capacity.

Capacity: 350 lbs or 750 lbs
Fits: 1/2 Ton and Larger Pickup Trucks or Tractors with a three-point hitch
Material: Poly Hopper
Spread Material: Bagged Rock Salt or Sand, Bagged 50/50 Salt/Sand Mix (*Depending on Model)
Meyer
MEYER BASE LINE TAILGATE SPREADER
MEYBASELINE
USD
Meyer Base Line (BL) tailgate spreaders offer contractors economical ice control. The BL-240, BL-400, and the BL-750 easily attach to any vehicle with a two-inch receiver hitch. The 240/400 spreaders work exceptionally well with SUVs, light pick-up trucks, tractors and utility vehicles, while the brand new BL-750 is perfect for full size pickups. All three spreaders are perfect for small- to medium-sized jobs like icy walkways and long, snowy driveways.

Capacity: 240 lbs / 3.7 Cubic Feet, 400 lbs / 6.3 Cubic Feet, & 750 lbs / 10.5 Cubic Feet
Fits: SUVs, Light Pick-Up Trucks, Tractors and Utility Vehicles
Material: Poly Hopper
Spread Material: Bagged Rock Salt
Meyer
MEYER 96" RTG CD ELECTRIC SS DUMP TRUCK SPREADER
63907
$ 7,066.46 $ 7,066.46 7066.46 USD
Turn Your Dump Truck Into A Salt Spreader - The Meyer Replaceable Tailgate spreader is a center discharge stainless steel, 12-volt electric powered spreader that reliably moves salt, sand or combination of both. It fits beds that are 84- to 90-inches in width and uses a self-contained auger to move the material. The Meyer RTG spreader easily replaces your existing tailgate and provides adequate ground clearance for the spinner mechanism. It uses a combination of a self-contained auger with removable spinners and can easily be added to any dump truck. It’s the perfect spreader for parking lots because its center drop allows for complete lane coverage.

Fits: Medium-duty Dump Trucks (15,000 GVW and larger)
Motor: Electric
Construction Material: Stainless steel
Spreading Material: Salt, 50/50 salt-sand mix, sand
Meyer
MEYER CROSS CONVEYOR DUMP TRUCK SPREADER
62729
USD
Versatility For Four-Season Use - Equip your medium-duty (15,000 GVW and larger) dump truck to handle your year-round spreading needs. Whether you’re shouldering material, filling a ditch, patching asphalt or spreading sand on snow and ice (which requires an optional spinner attachment), the heavy-duty Cross Conveyor is an under tailgate system that can get the job done. The Meyer Cross Conveyor is the most efficient method of distributing granular or asphalt material on the market today. It mounts quickly and easily underneath your dump truck's tailgate for year-round sue. No matter what the job, this heavy-duty conveyor system performs like a workhorse while saving you labor, time and material.

Fits: Medium-duty dump trucks (15,000 GVW and larger)
Flow rate: 240 tons/hr.
Motor: Central hydraulics
Hopper Material: Carbon steel
Spreading Material: Asphalt, granular materials