Quality Vehicle Equipment & Services | Equipment Specialists Inc (ESI)

Thanks for visiting our new website! We are currently undergoing improvements. Please click here to see our Parts Diagrams like our old site!

Shop

718 items found.

All Products

- 718 items

Filters

(Clear All)

Brand : Meyer

BOLT H 3/8-16 X 3 1/4 GR5 CP

22119

$ 0.47

MEYER RTG PREMIUM DUMP TRUCK SPREADER

MEYRTG

Turn Your Dump Truck Into A Salt Spreader - The Meyer Replaceable Tailgate spreader is a center discharge stainless steel, 12-volt electric powered spreader that reliably moves salt, sand or combination of both. It fits beds that are 84- to 90-inches in width and uses a self-contained auger to move the material. The Meyer RTG spreader easily replaces your existing tailgate and provides adequate ground clearance for the spinner mechanism. It uses a combination of a self-contained auger with removable spinners and can easily be added to any dump truck. It’s the perfect spreader for parking lots because its center drop allows for complete lane coverage.

Fits: Medium-duty Dump Trucks (15,000 GVW and larger)
Motor: Electric
Construction Material: Stainless steel
Spreading Material: Salt, 50/50 salt-sand mix, sand

HOTSHOT 70, 70 HD, 100 HD BROADCAST SPREADER

MEYHOTSHOT

Meyer’s premium Hot Shot broadcast spreaders were built to handle extreme conditions year-round and can hold 70 or 100 pounds of material with a maximum spread range of 12 feet to 18 feet, depending on the model. Heavy-duty models are made of stainless steel.

Capacity: 70lbs, 100lbs
Construction: Steel Frame or Stainless Steel Frame

MEYER UNDER TAILGATE PREMIUM DUMP TRUCK SPREADER

MEYUTG

Turn Your Dump Truck Into A Salt Spreader - The Meyer Under Tailgate (UTG) Premium Spreader has all the same great features and benefits of the Baseline 960, but it’s constructed with heavier gauge stainless steel, meaning it was built to take more of a beating. This unit doesn’t require you to replace your tailgate, so you can use the dump bed when the spreader is not in use. Meyer UTG Premium spreaders can apply salt, sand or combination of both, from four to 40 feet away on icy drives and snowy parking lots.

If your vehicle has a central hydraulics system and you want to use it to power your spreader, you need our hydraulic-driven UTG. It can be powered using a direct-drive or gearbox-drive system. Direct-drive gives you higher performance and decreased maintenance, while the gearbox-drive offers better control at low spread rates for more efficient spreading. For dump trucks without central hydraulics, or if you don’t want to use them to drive the spreader, you’ll want a Meyer electric UTG. Electric motors offer many ease-of-use advantages and are ideal for lighter, free-flowing materials.

Fits: Medium-duty Dump Trucks (15,000 GVW and larger)
Motor: Hydraulic or electric
Construction Material: Stainless steel
Spreading Material: Salt, 50/50 salt-sand mix, sand

MEYER POLYHAWK HOPPER SPREADER

MEYPOLYHAWK

Have It Your Way With A Polyhawk - Popular with contractors and other vocational users, the Polyhawk is powered by your choice of a Honda or Briggs & Stratton gas engines or a dual, 12-volt electric motor. The Polyhawk can even be operated by your vehicle’s central hydraulic system. Available in in 6' and 8' lengths, Polyhawks are perfect for spreading bulk materials like rock salt with sand mixed in it.

Capacity: 1.5 or 2.0 Cubic Yards
Motor: Briggs and Stratton, Honda, 12-volt dual electric, Central Hydraulic
Fits: 3/4-to-1 Ton Pickup Trucks
Hopper Material: Polyethylene
Spreading Material: Salt, 50/50 Salt/Sand Mix, Sand

MEYER CROSSFIRE HOPPER SPREADER

MEYCROSSFIRE

Better By Design And Backed By A 5-Year Warranty - The Crossfire was designed with extensive input from experienced end users looking for a better insert spreader. Each model has been designed to be easier to use, easier to maintain and easier on your vehicle. The Crossfire Deluxe was designed with an integrated pre-wet system.

Capacity: 1.5 or 2.0 Cubic Yards
Fits: 3/4-Ton Pickup Trucks
Hopper Material: Polyethylene
Spreading Material: Dry, Free-Flowing Rock Salt

MEYER ELITE UTV HOPPER SPREADER

MEYELITEUTV

Built To Make Your UTV A Year-Round Work Horse - Meyer's Elite UTV insert spreader is available in .3 and 4. cubic yards so it fits easily into the back of most utility vehicles. It's powered by a sealed 12-volt electric motor and features a stainless steel hopper which means less maintenance and less down time, so you can continually keep pathways and tight areas clear of snow and ice. Designed for contractor use, the Meyer Elite utility vehicle insert spreader allows you to spend less time adjusting or cleaning and more time on the job. It provides the best performance possible, every time you use it.

Capacity: 0.3 or 0.4 Cubic Yards
Motor: Briggs and Stratton, Honda, 12-volt Dual Electric, Central Hydraulic
Fits: Utility Vehicles
Hopper Material: Stainless Steel
Spreading Material: Salt, 50/50 Salt-Sand, Sand

MEYER ELITE CAB & CHASSIS HOPPER SPREADER

MEYELITECAB

Meyer offers eight different configurations in our Elite Cab & Chassis insert spreader line-up. All are built using fewer moving parts to keep you on the job spreading. Hoppers are made of stainless steel and are available in 8' and 10' lengths with 3.5 and 4.5 cubic yard capacities. Drive options include 10hp Brigg & Stratton gas, 11hp Honda gas, 12-volt dual electric or central hydraulics, so there's a model perfect for your municipality's fleet of trucks.

Capacity: 3.5 or 4.5 Cubic Yards
Engine: Briggs and Stratton, Honda, 12-Volt Dual Electric, Central Hydraulics
Length: 8' or 10'
Fits: Cab & Chassis
Hopper Material: Stainless Steel
Spreading Material: Salt, 50/50 Salt-Sand, Sand

MEYER BASE LINE 600 & 800 HOPPER SPREADER

MEYBASELINE68

Introducing A Reliable And Economical Spreader Line - Powered by a Briggs & Stratton or Honda gas engine or dual-electric 12-volt motor, the BL-600 and BL-800 insert spreaders feature a stainless steel inverted-V and drag chain conveyor system for even distribution of snow and ice removal material. The extra-large capacity hopper fits into short or long bed pickup trucks and is built to withstand anything Mother Nature can throw at it.

Capacity: 1.5 or 2.0 Cubic Yards
Motor: BL-600 - 6.5 HP Briggs and Stratton. BL-800 - 11hp Honda, 10.5hp Briggs & Stratton or 12-volt Dual Electric
Lengths: 5' (LPV), 6' (PV), 8' (PV)
Fits: Pickup Truck
Hopper Material: Stainless steel or Carbon steel (8' Briggs model only)
Spreading Material: Salt, 50/50 Salt/Sand Mix, Sand or Free-Flowing Granular Material

MEYER ELITE PICKUP TRUCK HOPPER SPREADER

MEYELITE68

Meyer's Elite pickup insert spreader is available in 0.5, 1.5 and 2.0 cubic yards to fit in the bed of today's most popular pickup trucks. It's powered by your choice of 10.5hp Briggs & Stratton or 11hp Honda gas, 12-volt dual electric or central hydraulics. With ten models available, there's one perfect for your spreading jobs. Designed for contractor use, the Elite pickup insert spreader allows you to spend less time adjusting or cleaning and more time on the job. It provides the best performance possible, every time you use it.

Capacity: LPV - 0.5, PV - 1.5 and 2.0 cubic yards
Engines: 10.5hp Briggs & Stratton, 11hp Honda, 12V Dual Electric, Central Hydraulics
Lengths: 5' (LPV), 6' (PV), 8' (PV)
Fits: Pickup Truck
Hopper Material: Stainless Steel
Spreading Material: Salt, 50/50 Salt-Sand, Sand

MEYER BLASTER SPREADER

MEYBLASTER

When you need to control the flow of any material, the Meyer Blaster is the tailgate spreader for you. Compatible with ½-ton and larger pickup trucks with a two-inch receiver or tractors with a three-point hitch, the Meyer Blaster comes in two sizes: The Blaster-350 is available in a 350 lb/6.5-cubic-foot capacity and the Blaster-750 features a 750 lb/12.8-cubic-foot capacity.

Capacity: 350 lbs or 750 lbs
Fits: 1/2 Ton and Larger Pickup Trucks or Tractors with a three-point hitch
Material: Poly Hopper
Spread Material: Bagged Rock Salt or Sand, Bagged 50/50 Salt/Sand Mix (*Depending on Model)

MEYER BASE LINE TAILGATE SPREADER

MEYBASELINE

Meyer Base Line (BL) tailgate spreaders offer contractors economical ice control. The BL-240, BL-400, and the BL-750 easily attach to any vehicle with a two-inch receiver hitch. The 240/400 spreaders work exceptionally well with SUVs, light pick-up trucks, tractors and utility vehicles, while the brand new BL-750 is perfect for full size pickups. All three spreaders are perfect for small- to medium-sized jobs like icy walkways and long, snowy driveways.

Capacity: 240 lbs / 3.7 Cubic Feet, 400 lbs / 6.3 Cubic Feet, & 750 lbs / 10.5 Cubic Feet
Fits: SUVs, Light Pick-Up Trucks, Tractors and Utility Vehicles
Material: Poly Hopper
Spread Material: Bagged Rock Salt

MEYER UTILITY TRACTOR SNOW PLOW

MEYUTTRAC

If you’re tackling the kind of jobs that require a utility tractor during the year, that probably means you have a lot of snow-covered land during the winter. Take charge of that snow with Meyer’s Heavy-Duty Agriculture Tractor (H.A.T.) mount. It allows you to easily attach Meyer moldboards to leading brands of utility tractors including John Deere, Case, New Holland, Cub Cadet, Kubota, Massey Ferguson, Kioti and more.

Blade Widths: 7'6", 8', 8'6" & 9"
Fits: Skid Steers
Moldboard: Steel & Polyethylene

MEYER COMPACT TRACTOR SNOW PLOW

MEYCOMTRAC

We know you and your compact tractor have a lot of land to take care of year-round. When it’s covered with snow, did you know you can use a Meyer universal mount to easily attach moldboards to your compact tractor? This includes leading brands like John Deere, Case, New Holland, Cub Cadet, Kubota, Massey Ferguson, Kioti and more. Any compact tractor or skid steer that uses a universal attachment system can be equipped with a Meyer plow.

Blade Widths: 7'6", 8', 8'6" & 9"
Fits: Compact Tractors
Moldboard: Steel & Polyethylene

MEYER SKID STEER SNOW PLOW

MEYSKID

Your landscaping and agricultural snow-removal needs may seem tough, but they have met their match thanks to Meyer. Our din plate-style mount allows you to easily attach Meyer snow plows to leading brands of skid steers like Bobcat, CAT, John Deere, Gehl, Case, New Holland and more. The all-new Meyer Tractor Pro mount allows you to use a full-trip Lot Pro or Drive Pro snow plow for your skid steer. And when the Lot Pro is paired with Meyer’s nine position wings, your skid steer becomes a left-right capable box plow.

Blade Widths: 7'6", 8', 8'6" & 9"
Fits: Skid Steers & Compact Tractors
Moldboard: Steel & Polyethylene

MEYER UTILITY VEHICLE SNOW PLOW

MEYUTV

When you add a Meyer® Drive Pro™ snow plow to your new or existing utility vehicle, you get the perfect solution for plowing sidewalks, long driveways or any space where a pickup truck isn't appropriate. This contractor-grade plow features Meyer's easy-to-use 2-inch receiver mount and is available in four moldboard sizes (5', 6', 6' 8" and 7' 6") to suit your application. Available with full-hydraulics or self-angle. Unlike most snowplow attachments for utility vehicles, the Drive Pro's moldboard goes up, down, right or left with a remote control and is 100% commercial grade. Drive Pro full-trip moldboards are designed to give way, absorbing the impact caused by snow covered objects like uneven sidewalks, protecting the equipment and ensuring operator safety. Drive Pro’s EZ-Mount Receiver Hitch mounting system conveniently attaches or detaches in well under a minute, and leaves the vehicle with an off-the-assembly-line appearance when not attached.

Blade Widths: 5', 6' 6'8" & 7'6"
Fits: Utility Vehicles
Moldboard: Steel

MEYER AIRPORT TRACTOR SNOW PLOW

MEYAIRPORT

You know your airport tractor can handle a lot. Now you can watch it obliterate snow. Turn your airport tractors into multi-purpose snow removal vehicles when adding a Meyer® Drive Pro™ moldboard. This plow does the job for tight areas such as jet ways, outdoor cargo areas or any place a large vehicle and plow just won't fit. The Meyer Drive Pro is compatible with TUG and Harlan ground support equipment, so watch your airport tractor transform when you add this compact, rugged and easy-to-use steel snow plow. The Meyer Drive Pro is an easy-to-use, fully functional snowplow operated from the comfort of the vehicle's cab. The Drive Pro attaches uses a custom mount, and once attached you don’t need to leave the vehicle to angle the plow.

Blade Widths: 5', 6' 6'8" & 7'6"
Fits: TUG & Harlan Airport Tractors
Moldboard: Steel

MEYER HOMEPLOW PERSONAL PLOW

MEYHOME

For homeowners who need to plow long driveways and want to stay warm and dry inside their vehicle. The HomePlow connects with Quick-Link™: an easy-to-use component that slides into a Class 3, 2-inch front receiver hitch. It allows users to control all plow operations from the warmth, comfort and safety of your vehicle. Integrated mounting wheels let you attach or remove the plow in less than a minute, leaving no visible hardware behind.

Blade Widths: 6'8" or 7'6"
Fits: SUVs & Light Pickup Trucks

MEYER WINGMAN PLOW

MEYWINGMAN

Meet the commercial-grade plow for business property managers, who independently handle snow removal in parking lots, roads and alleyways. The WingMan is easy for you to buy, own, and operate. You can install it yourself in under an hour. Get ready to save time, save money, and get back to business faster.

Blade Widths: 6'8" or 7'6"
Fits: 1/2 -Ton and Light Pickup Trucks
Moldboard: Lightweight Military-Grade Steel

MEYER ROAD PRO 36-SERIES MUNICIPAL PLOW

MEYRP36

The Meyer® Road Pro™ 36-Series is the biggest and toughest snow plow in the Meyer line, the perfect match for 26,000 - 33,000 GVW trucks. It leaves only the cleanest surface behind with the industry's best snow-rolling action. Road Pros are available in 9-foot, 10-foot or 11-foot full-trip lengths or a 10-foot bottom-trip.

Blade Widths: 9', 10' & 11'
Fits: 26,000 - 33,000 GVW Municipal Trucks
Moldboard: Steel or Polyethylene

MEYER SUPER-V3 PLOW

MEYV3

The Meyer Super-V3 brings next generation innovation to contractor-grade Vplows. Made for ¾-ton and larger trucks, it’s engineered with features designed to move more snow, faster and with more control. With its pistol grip controller and independently controlled wings, you can choose from a V, scoop or straight blade configuration with push-button ease. The Super-V3 gives you safer nighttime plowing with its standard Nite Saber® LED lights and features industry-leading ground clearance for better stacking and less bottoming out. Made of carbon steel, hook it up, and change the way you plow forever. The Super-V3 will attach and detach in minutes with a simpler 2-plug electrical attachment. Once the Super-V3 is detached, your vehicle will have an off-the- assembly line appearance. And Meyer's free-standing jack stand allows you to adjust the V3's height on uneven or shifting surfaces, making on/off easy in any condition.

Blade Widths: 8'6", 9'6", & 10'6"
Fits: 3/4 Ton Trucks and Larger
Moldboard: Steel or Stainless Steel

MEYER SUPER-V3 LIGHT DUTY PLOW

MEYV3LD

Why let the big guys have all the fun? We know your 1/2-ton pickup is capable of the toughest jobs, which is why we created the Meyer Super-V3 Light Duty (LD). With a plow spanning 7’6” in length, the Super-V3 LD has trip-edge moldboards for more efficient and shock-absorbent plowing. Plus it features industry-leading ground clearance, self-diagnostics and Hands-Free Plowing (HFP). One-half ton trucks don’t seem light at all with a Meyer Super-V3 LD plow attached. This bottom-trip commercial-grade plow, featuring LED lights and industry-leading ground clearance, is perfect for contractors with ½-ton trucks who need the flexibility of a V-plow.

Blade Widths: 7'6"
Fits: 1/2 Ton Trucks
Moldboard: Steel

MEYER ROAD PRO 32-SERIES PLOW

MEYRP32

The Meyer® Road Pro™ 32-Series features flared wings for better snow throwing action. It was designed specifically for municipalities and contractors using 9,300 – 26,000 GVW trucks. Available in 8-foot, 9-foot or 10-foot lengths, all moldboards in this series are 32-inches-high and perfect for clearing side streets, parking lots and cul-de-sacs.

Blade Widths: 8', 9', & 10'
Fits: 9,300 – 26,000 GVW Municipal Trucks
Moldboard: Steel

MEYER DIAMOND EDGE PLOW

MEYDIAMOND

Built for contractors who don’t have a minute to waste, the Meyer Diamond Edge plow features the tallest and most aggressive bottom-trip, contractor-class moldboard on the market. With the tallest and most aggressive moldboard, the Meyer Diamond Edge moves more snow than competitive contractor plows. The bottom-trip feature keeps the moldboard upright and performing, while the lower portion gives way when obstacles are struck, so you can keep plowing without losing the entire load. Plus the trip-edge absorbs and dissipates the shock caused by obstructions saving wear and tear on the driver, truck and plow.

Blade Widths: 7'6", 8', 8'6", 9'
Fits: 3/4-Ton Trucks and Larger
Moldboard: Steel

MEYER LOT PRO PLOW

MEYLP

For those who want to make a finished lot look like it does in July, the Lot Pro™ is a professional-grade plow for contractors who need to plow large parking lots and streets. The Lot Pro fits on 3/4-ton pickup trucks and larger. The Lot Pro™ features the tallest and most aggressive contractor-class moldboard on the market. Thirty-two inches tall with a 75° attack angle, Lot Pros deliver better overall snow clearing performance in less time. Plus, its aggressive attack angle allows for superior back-dragging performance.

Blade Widths: 7'6", 8', 8'6", 9'
Fits: 3/4-Ton Trucks and Larger
Moldboard: Steel or Poly

MEYER LOT PRO LIGHT DUTY

MEYLPLD

Plowing driveways in a full size pickup can be a challenge, that’s why the Drive Pro is engineered to be a lightweight, commercial-grade plow designed to provide optimal maneuverability in tight residential settings. The Drive Pro Full Trip Snow Plow attaches or detaches in well under a minute with the pull of one handle; and once attached, you don't need to leave the vehicle to angle the plow. This commercial-grade plow is perfect for clearing snow from tight spots like narrow driveways and alleys that larger trucks just can’t get to.

Blade Widths: 7'6"
Fits: Half-ton Pickups with Snow Prep Packages
Moldboard: Steel

MEYER SUPER BLADE PLOW

MEYSUPER

The all new commercial-grade Meyer® Super Blade™ is bigger and stronger than any other adjustable plow on the market. At the press of a button, it expands from 8’ to 10.5’, or anywhere in between. And the flared wings extend as a pair or independently. Super Blade features Nite Saber® LED lights, Hands-Free Plowing (HFP), industry leading ground clearance, and much more. Your plowing capabilities are now limitless.

Blade Widths: 8' to 10'
Fits: 3/4-ton Pickups and Larger
Moldboard: Tubular Steel

MEYER DRIVE PRO PLOW

MEYDP

Plowing driveways in a full size pickup can be a challenge, that’s why the Drive Pro is engineered to be a lightweight, commercial-grade plow designed to provide optimal maneuverability in tight residential settings. The Drive Pro Full Trip Snow Plow attaches or detaches in well under a minute with the pull of one handle; and once attached, you don't need to leave the vehicle to angle the plow. This commercial-grade plow is perfect for clearing snow from tight spots like narrow driveways and alleys that larger trucks just can’t get to.

Blade Widths: 5', 6', 6'8" & 7'6"
Fits: Full-size SUVs, Light-duty Pickups, Half-ton Pickups
Moldboard: Steel

Filters

View Cart

View Wishlist

My Account

Snow and Ice

Liftgates

Truck Bodies

Truck Equipment

Van Equipment

Shop

All Products

Pricelist :

Sort By :

Filters

Filters

Brand

Categories