EZ Dumper Stainless Steel Dump Inserts
EZSSDMP
Made from steel or stainless steel construction, EZ-Dumper® inserts are available in standard 8’ size with 2 cubic yard capacity to fit most full-size pickups, and smaller 6’ model with 1.5 cubic yard payload capacity available to fit most short-bed trucks. EZ-Dumper® inserts are designed and manufactured to perform.
EZ-Dumper® inserts are tough. EZ-Dumper® products are designed, engineered and manufactured to deliver dependable performance in tough conditions and extreme environments – the perfect solution for safely & efficiently moving any load from one jobsite to another.
Please contact us for more information about this product.
Request a QuoteShare this product:
EZ Dumper Stainless Steel Dump Inserts Specifications
Insert Type | EZ0012TSS-SB 6' Dump insert |
Bed Length | 74-1/8" |
Unloaded Weight | 690 lb |
Payload Capacity | 6000 lb |
Volume Capacity | 1.5 Cubic yards |
Dump Angle | 51 Degrees |
Frame Construction | Structural stainless steel angle (Top frame) |
Side Steel | 14 Gauge |
Deck Steel | 12 Gauge |
Tailgate | Double-acting removable spreader |
Energy Source | Truck battery |
Power Unit | Double acting monarch pump |
Cylinders(s) | Mounted under unit |
Hydraulics | Power up/ power down |
Remote control | Standard |
Tie-down Features | Full length flat bar rub rails |
Expansion Features | 6 Stake pockets (outside) |
Lubrication | Thread in grease fittings on pivots |
Installation | Four bolt-down clamps |
Standard Color | 304 Stainless steel (Unfinished) |
Warranty | 2 Years front to tailgate |
Insert Type | EZ0012TSS 8' Stainless Steel Dump insert |
Bed Length | 96" |
Unloaded Weight | 777 lb |
Payload Capacity | 6000 lb |
Volume Capacity | 2 Cubic yards |
Dump Angle | 51 Degrees |
Frame Construction | Structural stainless steel angle (Top frame) |
Side Steel | 14 Gauge |
Deck Steel | 12 Gauge |
Tailgate | Double-acting removable spreader |
Energy Source | Truck battery |
Power Unit | Double acting monarch pump |
Cylinders(s) | Mounted under unit |
Hydraulics | Power up/ power down |
Remote control | Standard |
Tie-down Features | Full length flat bar rub rails |
Expansion Features | 8 Stake pockets (outside) |
Lubrication | Thread in grease fittings on pivots |
Installation | Four bolt-down clamps |
Standard Color | 304 Stainless steel (Unfinished) |
Warranty | 2 Years front to tailgate |
EZ Dumper Stainless Steel Dump Inserts Features
6,0000 lb lift capacity
12 Gauge stainless steel floor
14 Gauge stainless steel sides
Expansion stake pockets (outside)
Full-length flat bar rub rails
Natural stainless steel finish
Convert your pickup into a dump truck in 2-3 hours without the overhead expense
Removable, double-acting tailgate lets you dump, then spread what you dump
Full front-to-tailgate, parts and labor 2-year warranty
Fits most full-size trucks
- Structural steel construction with zinc prime & powder coated finish
- interior body widths are 88″(EXT) & 87″(INT) and exterior width is 96″
- Interior height is 72″ high
- Floors are constructed of 10GA steel sheet with 3″ structural channel on 16″ centers
- Posts are constructed of 12GA steel sheet; exterior posts are 5″ formed posts on 36″-48″ centers, Interior posts are 3″ structural channel on 16″ centers
- Top rails are constructed of 3″ x 3″ x 1/8″ square steel tubing
- Rear corner posts are constructed of 7GA steel
- Roofs are constructed of 12GA steel with a 6″ peak
- Lockable security-style doors with 3″ x 3″ supports
- Standard 6″ steel ground rollers